产品描述德国进口宝的插入式涡轮流量计
上海乾拓贸易有限公司
联系人:杨江玲
企业QQ:2880626083
手 机:(微信)
电 话:-8012
邮箱;@163.com
地址:上海市嘉定区江桥嘉涌路6号楼713室
产品介绍:
由 Bürkert设计的管件系统保证了可方便地
流量计会生成与流速成比例的脉冲频率信号,
并可由 Bürkert 发送器/控制器进行处理。
带涡轮的流量计适用于低固体含量的中性和弱腐蚀性液体。
经济地集成到管道系统中,不需额外的管道
三线,频率脉冲结构,适合直接连接在 PLC(PNP 和 NPN)上
可简便地连接到分离式 Bürkert 分析仪上
将设备安装入 DN20 至 DN400 的管道中。
主要特点:
pulse signal, proportional to the flow rate, which can easily
The paddle wheel flowmeter for continuous flow measurement is especially
be transmitted and processed by a Bürkert transmitter/controller
Economic integration in pipe systems without any additional piping
? 3-wire frequency pulse version to directly interface with PLC’s (both PNP and NPN)
The Bürkert designed fitting system ensures simple installation of the devices
? Connection to Bürkert devices in remote versions
designed for use in neutral, slightly aggressive, solid free liquids.
into all pipes from DN20 to DN400. The flowmeter produces a frequency
技术参数:
cable 1.5 mm2 cross section; max. 50 m length, shielded
Viscosity / Pollution 300 cSt. max. / max. 1% (Size of particles 0.5 mm max.)
Linearity ±0.5% of FS.* Repeatability ±0.4% of Reading1)
(32...176°F) -15...+80°C (5...176°F) Medium pressure max. PN10 (145.1 PSI)
Sensor armature, paddle wheel Axis, bearing / Seal
Brass, stainless steel 1.4404/316L, PVC, PP, PVDF PVDF Ceramics /
Environment Ambient temperature -15...+60°C (5 ...+140°F)
(operating and storage) Relative humidity 80%, without condensation
FKM (EPDM option) Electrical connection Cable plug Connection
Measurement deviation Teach-In Standard K-factor ±1% of Reading1)
Materials Housing / Union nut Cable plug Wetted parts materials Fitting
Complete device data (fitting + electronic module) Pipe diameter
DN20...DN400 Measuring range 0.3...10 m/s Medium temperature with fitting
in PVC / PP Stainless steel, brass, PVDF 0...+50°C (32...122°F) / 0...+80°C
(at the teach flow rate value) ±2.5% of Reading1)
Compatibility With fittings S020 (see corresponding data sheet)
产品描述德国进口宝的插入式涡轮流量计
搜了网提醒您:
1、本信息由98黄页网用户发布,98黄页网不介入任何交易过程,请自行甄别其真实性及合法性;
2、跟进信息之前,请仔细核验对方资质,所有预付定金或付款至个人账户的行为,均存在诈骗风险,请提高警惕!