FP5300流量变送器 Omega流量传感器FP5300流量变送器

　　FP5300流量变送器

　　率/总显示继电器输出流量变送器

　　fp90系列

　　和复位累加器

　　可扩展的输出

　　继电器选项

　　安装通用性

　　模拟功能

　　2×16点阵字符液晶

　　耐化学腐蚀外壳和自愈窗口

　　大按钮

　　清楚标明终端标签应用

　　流量控制和监测

　　过滤或软化器再生

　　污水综合化

　　泵保护

　　给水泵脉冲

　　水的分布

　　Leak Detection

　　The FP90 Series Flow Transmitter is an advanced solution that converts the signal from many flow sensors into a 4 to 20 mA signal for long distance transmission. Configuration flexibility is maximized with two optional relays for process control, two packaging options for integral/pipe mount or panel installation, and scalability for virtually any flow range or engineering unit. State-of-the-art electronic design ensures long-term reliability, signal stability, and simple user setup and operation. The FP90 can be integrally mounted to FP8500 series paddlewheel sensors utilizing an mounting kit. The FP90 can be remotely used with the OMEGA ? FP-5100, FP-5200, FP-5300, FP-5060, FP-2541, FP-5600, FP-3-1500 or FP-6000 flow sensors and a FP90UM mounting kit. The FP90-XP units are designed to be panel mounted. The three front keys control all programming and scaling of the FP90-there are not pots to tweak or internal adjustments to make. Simply enter the K-factor and the FP90 displays rate with field-adjustable decimal point, mA output value, total (field selectable for resettable or non-resettable operation) and the date of the last reprogramming. The 8-digit alphanumeric LCD shows every program step in clear language, allowing display in any engineering units and timebase in seconds, minutes, hours or days. A special pushbutton sequence permits entry into the programming, thus providing security against unauthorized reprogramming.

　　SPECIFICATIONS

　　Compatibility: Flow Sensors with frequency outputs

　　Accuracy: ±0.5% of reading @ 25°C

　　Enclosure<br> Rating: NEMA 4X (IP65) front

　　Case: PBT

　　Window: Polyurethane coated polycarbonate

　　Keypad: Sealed 4-key silicone rubber

　　Weight: Approx. 325 g (12 oz)

　　Display: Alphanumeric 2 x 16 LCD

　　Update Rate: 1 second

　　Contrast: User selected, 5 levels

　　Environmental

　　Operating Temperature: -10 to 70°C (14 to 158°F)

　　Storage Temperature: -15 to 80°C (5 to 176°F)

　　Relative Humidity: 0 to 95%, non-condensing

　　Electrical

　　Sensor Input:

　　Range: 0.5 to 1500 Hz

　　Sensor Power:

　　2-Wire: 1.5 mA @ 5 Vdc ±1%

　　3 or 4 Wire: 20 mA @ 5 Vdc ±1%

　　Optically isolated from current loop; short circuit protected

　　Current Output: 4 to 20 mA, isolated, fully adjustable and reversible

　　Power: 12 to 24 Vdc ±10%, regulated

　　Max Loop Impedance: 50 Ω max @ 12 V, 325 Ω max @ 18 V, 600 &Omega max @ 24 V

　　Update Rate: 100 ms

　　Accuracy: ±0.03 mA

　　Relay Output: Mechanical SPDT

　　Contacts: Hi, Lo, Pulse, Off

　　Maximum Voltage Rating: 5 A @ 30 Vdc, 5 A @ 250 Vac, resistive load

　　Hysteresis: User adjustable; max 300 pulses/min

　　Open-Collector Output: Hi, Lo, Pulse, Off Open-collector, optically isolated, 50 mA max, sink, 30 Vdc max pull-up voltage. Max 300 pulses/min

　　For complete product specifications see the Related Links section at the bottom of this page.

　　产品型号/产品描述

　　Flow Transmitters

　　FP90-1 Field mount transmitter with 4-20mA and open collector outputs

　　FP90-2 Field mount transmitter with 4-20mA output and 2 relays

　　FP90-3 Field mount for 1 or 2 inputs with 4-20mA output for input 1, 2 or differential

　　FP90-1P Panel mount transmitter with 4-20mA and open collector outputs

　　FP90-2P Panel mount transmitter with 4-20mA output and 2 relays

　　FP90-3P Panel mount transmitter for 1 or 2 inputs with 4-20mA output for input 1, 2 or differential

　　Flow Sensors for Integral Mounting (Requires FP90IM)

　　FP8501 1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

　　FP8502 5" to 8" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

　　FP8503 1/2 " to 4" pipe, PVDF body/Hastelloy C shaft, Min Flow 1 FPS

　　Low Flow Sensors (0.3 fps min) for Integral Mounting (Requires FP90IM)

　　FP8501A 1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

　　FP8502A 5" to 8" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

　　FP8503A 1/2 " to 4" pipe, PVDF body/Hastelloy C shaft, Min Flow 0.3 FPS

　　Remote Mount Paddlewheel Sensors

　　FP-5300 1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

　　FP-5600 1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

　　Accessories

　　FP90IM Integral mounting kit for mounting on top of FP85XX sensors

　　FP90UM Universal mounting kit for remote wall or pipe mount

　　FP90-4X NEMA 4X cover (panel mount)

　　FP90RC RC filter (for relay use)

　　U24Y175 24 Vdc1 175 mA Power Supply

　　Popular Sensor Installation fittings

　　FP-5307M 3/4" molded PVC

　　FP-5307CU 3/4" Copper

　　FP-5320M 2" molded PVC

　　FP-5320GI 2" NPT Galvanized Iron

　　FP-5340CS 4" Carbon Steel Weldolet

　　注释: * Field mount transmitters require FP90IM internal mounting kit for FP8500 or FP8500A sensor or FP90UM for all other compatible sensors.

　　Fittings are also required, see FP series fittings.

　　FP90 comes complete with operator's manual.

　　FP90-XP comes complete with mounting bracket, panel gasket, and operator's manual.

　　FP5300流量变送器

　　FP5300流量变送器 Omega流量传感器FP5300流量变送器

　　FP5300流量变送器 Omega流量传感器FP5300流量变送器 新相关产品：FTB700-D磁性美国OMEGA FTB700-D磁性